LKM10KHX10ABRS3

Manufacturer: Lockmasters

Product: LKM10K Type II Push Pull Automatic Bolt Retraction (ABR) Model with Kaba Mas X-10 & #3 Strike

IF THERE IS NO ADDED TO CART BUTTON - CAGE CODE IS REQUIRED - SEE BELOW
ATTENTION: Non-Government  Buyers, by FF-L-2740B Specification you must have or obtain a CAGE Code to purchase the FF-L-2740 Locks. Click here for instructions to obtain a CAGE Code

Series:  LKM10K

Model:  Handle Automatic Bolt Retraction (ABR)

GSA Type: II

Lock:  Kaba Mas X-10

Strike: #3 Inswing Door Surface Mount Single or Double Door Regular Bevel

Requires: Low Energy Automatic Door Operator & Access Control Push or Wave Button

Door Thickness: Minimum 1-1/8" Maximum 2-5/8"

Spindle Extension Available up to 3-3/8" door (Part Number - LKM10KEXT

The LockOne® Lock Series provides high security locking while offering automatic door operation.  The Automatic Bolt Retraction (ABR) meets section 404.3 of the Americans with Disabilities Act (ADA) and allows for hands-free operation of the the LKM10K. This device is compatible with any high security combination lock meeting FF-L-2740B, and with all 24Vdc building access control systems.  All LKM10K Models’ life safety and security features meet FF-L-2890C.  The combination lock represents the first level of security.  The access control device represents the second level of security and can initiate the automatic door operator.   The Push Pull Model includes an optional Key Override Function, which can override the access control device in the event of a power failure or malfunction.  

Type II – Pedestrian Door Pre-Assembled Lock (PDPL)

• Utilizes eletronic access control
• ADA compliant
• Single motion egress
• Non-handed
• 90 minute fire rating

Compliance & Certifications

• FF-L-2890C Approved
• GSA Approved
• U.L. Fire Rated
• NFPA 80 & 101 Life Safety
• ADA (404.3) Automatic Door Section

ABR FEATURES
Touchless Operation - By integrating an automatic door operator (not included) with a variety of push plate or wave switches the door is now completely automatic. Note, the FF-L-2740B combination lock must be unlocked (bolt is retracted).

Door Applications - Ideal for use with heavy specialty STC/RF doors.

SECURITY FEATURES

Combination Lock is Unlocked (bolt is retracted) - the LKM10K and the ABR motor are fully enabled to automatically retract the dead bolt from the strike.

Combination Lock is Locked (bolt is extended) - the LKM10K is mechanically blocked and the ABR motor is disabled for longevity of the ABR motor.

Dead Bolt - The FF-L-2890B specification requires a locking device equipped with dead bolt and trigger mechanism that operates when the combination lock is in the locked position.  The dead bolt automatically extends into the locked position when the trigger mechanism engages the strike.  

Encapsulated Strike - The LKM10K Lock Series comes with a strike that surrounds the dead bolt for reinforced security.  As specified four strikes are available for inswing, outswing & pairs of doors.

High Security Combination Lock Compatibility - The LKM10K Lock Series is designed to work with any standard footprint combination lock meeting Federal Specification FF-L-2740B (Kaba Mas X-10 and S&G 2740B).  No modificiations to the deadbolt is required.

Access Control Device Compatibility - The LKM10K Lock Series is an electrified lock and is compatible with a variety of electronic access control devices (12v or 24v DC - 1 amp).

Security In Depth - When both the combination lock and access control device are installed with the LKM10K Lock tiers of security are created.

 First Tier - FF-L-2740B approved combination lock

 Second Tier - Access Control Device or Key Override

Example of Day Locking - The supervisor “unlocks/opens” the combination lock to allow staff to enter throughout the day by utilizing the access control device.  The LKM10K Lock Series provides this managerial control.  However, once the combination lock is “locked/closed” the access control device  and Key Override is negated.

Monitoring Switches - Deadbolt Switch - monitors the Pedestrian Device  Bolt (Request to Exit - REX); Combination Lock Switch - monitors the FF-L-2740B Combination Lock Bolt and Entry Monitoring Switch - monitors the Lever Handle

SAFETY FEATURES

Single Motion Egress Handle (Push/Pull Model) - One simple push or pull of the ADA and UFSA compliant handle allows exit.  One hand guarantees a safe & easy exit even in emergency situations.   (Type II)

Key Override Option - A separate module is no longer necessary for this option. Key Override is standard on all LKM10K Lock Series models.  However, it is optional to utilize, so it can be added with little effort at a later date if necessary.   We recommend Key Override because it allows a key to “override” the access control device only.  It will not override the combination lock.  This capability is particularly important during the event of power outage, failure or malfunction of an access control device, or an emergency that requires expedited entry.

UL Fire Rating - The LKM10K Lock Series is UL Listed.   90 minute rating when installed with a Kaba Mas X-10 combination lock.   This rating is in accordance with the Standard, “Positive Pressure Fire Test of Door Assemblies”, ANSI/UL 10C, UBC 7-2 (1997).  

Illuminated Labels - All models of the LKM10K feature an illuminated label for easy visibility in no/low light situations.

BENEFITS
Interchangeable - You can install the LockOne™ Lock Series in your facility to maintain a consistent look as the exterior trim has not changed.

Retrofittable - Remove the existing LKM10K inside base plate and replace with the LKM10K ABR base plate.

Internal Raceway - If an internal raceway is not available we offer our optional Surface Mounted Wiring Kit.

Field Tested - The LKM10K ABR version was field tested with a variety of heavy duty, low energy door operators.